Table 166: Port Edit Options
(continued)
Your Action
Function
Field
1.
To specify an IPv4 address, select the check box
IPv4
address
.
2. Type an IP address—for example:
10.10.10.10
.
3. Enter the subnet mask or address prefix. For example,
24 bits represents
255.255.255.0
.
4. Click
OK
.
Specifies an IPv4 address for the interface.
NOTE: If the IP address is cleared, the interface
still belongs to the
inet
family.
IPv4 Address
1.
To specify an IPv6 address, select the check box
IPv6
address
.
2. Type an IP address—for example:
2001:ab8:85a3::8a2e:370:7334
.
3. Enter the subnet mask or address prefix.
4. Click
OK
.
NOTE: Ipv6 is not supported on EX2200 and EX4500
switches.
Specifies an IPv6 address for the interface.
NOTE: If the IP address is cleared, the interface
still belongs to the
inet
family.
IPv6 Address
Table 167: Recommended CoS Settings for Port Roles
Recommended Settings
CoS Parameter
There are four forwarding classes:
•
voice
—Queue number is set to 7.
•
expedited-forwarding
—Queue number is set to 5.
•
assured-forwarding
—Queue number is set to 1.
•
best-effort
—Queue number is set to 0.
Forwarding Classes
The schedulers and their settings are:
•
Strict-priority—Transmission rate is set to 10 percent and buffer size to 5 percent.
•
Expedited-scheduler—Transmission rate is set to 30 percent, buffer size to 30 percent, and
priority to
low
.
•
Assured-scheduler—Transmission rate is set to 25 percent, buffer size to 25 percent, and
priority to
low
.
•
Best-effort scheduler—Transmission rate is set to 35 percent, buffer size to 40 percent, and
priority to
low
.
Schedulers
When a desktop and phone, routed uplink, or layer 2 uplink role is applied on an interface, the
forwarding classes and schedulers are mapped using the scheduler map.
Scheduler maps
Imports the default
ieee-802.1
classifier configuration and sets the loss priority to
low
for the
code point 101 for the
voice
forwarding class.
ieee-802.1 classifier
Imports the default
dscp
classifier configuration and sets the loss priority to
low
for the code
point 101110 for the
voice
forwarding class.
dscp classifier
Copyright © 2010, Juniper Networks, Inc.
1148
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
