ether-type
Syntax
ether-type (0x8100 | 0x88a8 | 0x9100)
Hierarchy Level
[edit
ethernet-switching-options dot1q-tunneling
]
Release Information
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Description
Configure a global value for the Ethertype. Only one Ethertype value is supported at a
time. The Ethertype value appears in the Ethernet type field of the packet. It specifies
the protocol being transported in the Ethernet frame.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
•
dot1q-tunneling on page 1429
•
Example: Setting Up Q-in-Q Tunneling on EX Series Switches on page 1347
•
Configuring Q-in-Q Tunneling (CLI Procedure) on page 1386
1431
Copyright © 2010, Juniper Networks, Inc.
Chapter 62: Configuration Statements for Bridging and VLANs
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
