Table 244: Summary of Key RIP Routing Output Fields
(continued)
Additional Information
Values
Field
RIP Neighbors
This value is the name of the interface on which
RIP is enabled. Click the name to see the details for
this neighbor.
Name of the RIP neighbor.
Neighbor
State of the RIP connection:
Up
or
Dn
(Down).
State
This value is the configured address of the interface
on which RIP is enabled.
Local source address.
Source Address
This value is the configured address of the
immediate RIP adjacency.
Destination address.
Destination Address
The mode of sending RIP messages.
Send Mode
The mode in which messages are received.
Receive Mode
Value of the incoming metric configured for the RIP
neighbor.
In Metric
Related
Documentation
Configuring a RIP Network (J-Web Procedure) on page 1685
•
•
Layer 3 Protocols Supported on EX Series Switches on page 14
Monitoring Routing Information
Purpose
Use the monitoring functionality to view the
inet.0
routing table on the routing device.
Action
To view the routing tables in the J-Web interface, select
Monitor > Routing > Route
Information
. Apply a filter or a combination of filters to view messages. You can use
filters to display relevant events.
To view the routing table in the CLI, enter the following commands in the CLI interface:
•
show route terse
•
show route detail
Meaning
Table 245 on page 1708 describes the different filters, their functions, and the associated
actions.
Table 246 on page 1708 summarizes key output fields in the routing information display.
1707
Copyright © 2010, Juniper Networks, Inc.
Chapter 72: Verifying Layer 3 Protocols Configuration
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
