prefix-limit
Syntax
prefix-limit {
maximum number;
teardown <percentage> <idle-timeout (forever | minutes)>;
}
Hierarchy Level
[edit logical-systems logical-system-name protocols bgp
family
(inet | inet6) (any | flow |
labeled-unicast | multicast | unicast)],
[edit logical-systems logical-system-name protocols bgp group group-name
family
(inet |
inet6) (any | flow | labeled-unicast | multicast | unicast)],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address
family
(inet | inet6) (any | flow | labeled-unicast | multicast | unicast)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp
family
(inet | inet6) (any | flow | labeled-unicast | multicast | unicast)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name
family
(inet | inet6) (any | flow | labeled-unicast | multicast |
unicast)],
[edit logical-systems logical-system-name routing-instances routing-instance-name
protocols bgp group group-name neighbor address
family
(inet | inet6) (any | flow
| labeled-unicast | multicast | unicast)],
[edit protocols bgp
family
(inet | inet6) (any | flow | labeled-unicast | multicast | unicast)],
[edit protocols bgp group group-name
family
(inet | inet6) (any | labeled-unicast | multicast
| unicast)],
[edit protocols bgp group group-name neighbor address
family
(inet | inet6) (any | flow
| labeled-unicast | multicast | unicast)],
[edit routing-instances routing-instance-name protocols bgp
family
(inet | inet6) (any | flow
| labeled-unicast | multicast | unicast)],
[edit routing-instances routing-instance-name protocols bgp group group-name
family
(inet
| inet6) (any | flow | labeled-unicast | multicast | unicast)],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address
family
(inet | inet6) (any | flow | labeled-unicast | multicast | unicast)]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Limit the number of prefixes received on a BGP peering session and a rate-limit logging
when injected prefixes exceed a set limit.
Options
maximum number
—When you set the maximum number of prefixes, a message is logged
when that number is exceeded.
Range:
1 through 4,294,967,295 (2
32
– 1)
teardown <percentage>
—If you include the
teardown
statement, the session is torn down
when the maximum number of prefixes is reached. If you specify a percentage,
messages are logged when the number of prefixes exceeds that percentage. After
the session is torn down, it is reestablished in a short time unless you include the
idle-timeout
statement. Then the session can be kept down for a specified amount
of time, or forever. If you specify
forever
, the session is reestablished only after you
issue a
clear bgp neighbor
command.
Range:
1 through 100
Copyright © 2010, Juniper Networks, Inc.
1924
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
