stub
Syntax
stub <
default-metric
metric> <(no-summaries | summaries)>;
Hierarchy Level
[edit logical-systems logical-system-name protocols (ospf | ospf3)
area
area-id],
[edit logical-systems logical-system-name protocols ospf3
realm
(ipv4-unicast |
ipv4-multicast | ipv6-multicast)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)
area
area-id],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3
realm
(ipv4-unicast | ipv4-multicast | ipv6-multicast)],
[edit protocols (ospf | ospf3)
area
area-id],
[edit protocols ospf3
realm
(ipv4-unicast | ipv4-multicast | ipv6-multicast)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)
area
area-id],
[edit routing-instances routing-instance-name protocols ospf3
realm
(ipv4-unicast |
ipv4-multicast | ipv6-multicast)]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the
realm
statement introduced in Junos OS Release 9.2.
Support for the
realm
statement introduced in Junos OS Release 9.2 for EX Series
switches.
Description
Specify that this area not be flooded with AS external link-state advertisements (LSA)s.
You must include the
stub
statement when configuring all routing devices that are in the
stub area.
The backbone cannot be configured as a stub area.
You cannot configure an area to be both a stub area and a not-so-stubby area (NSSA).
Options
no-summaries
—(Optional) Do not advertise routes into the stub area. If you include the
default-metric
option, only the default route is advertised.
summaries
—(Optional) Flood summary LSAs into the stub area.
The remaining statement is explained separately.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
•
nssa on page 1895
•
Configuring OSPF Areas
Copyright © 2010, Juniper Networks, Inc.
1972
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
