Juniper JUNOS OS 10.3 - SOFTWARE Manual Download

Page: 208 / 3946

request system reboot (in 2 Hours) on page 112
request system reboot (Immediately) on page 112
request system reboot (at 1:20 AM) on page 112

Output Fields

When you enter this command, you are provided feedback on the status of your request.

request system reboot

user@host>

request system reboot

Reboot the system ? [yes,no] (no)

request system reboot

(at 2300)

user@host>

request system reboot at 2300 message ?Maintenance time!?

Reboot the system ? [yes,no] (no)

yes

shutdown: [pid 186]
*** System shutdown message from root@berry.network.net ***
System going down at 23:00

request system reboot

(in 2 Hours)

The following example, which assumes that the time is 5 PM (17:00), illustrates
three different ways to request the system to reboot in two hours:

user@host>

request system reboot at +120

user@host>

request system reboot in 120

user@host>

request system reboot at 19:00

request system reboot

(Immediately)

user@host>

request system reboot at now

request system reboot

(at 1:20 AM)

To reboot the system at 1:20 AM, enter the following command. Because 1:20 AM is
the next day, you must specify the absolute time.

user@host>

request system reboot at 06060120

request system reboot at 120
Reboot the system at 120? [yes,no] (no) yes

112

Complete Software Guide for Junos

OS for EX Series Ethernet Switches, Release 10.3

Summary of Contents for JUNOS OS 10.3 - SOFTWARE


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOS OS 10.3 - SOFTWARE

Reviews:

Related manuals for JUNOS OS 10.3 - SOFTWARE

Brands by name

Popular brands

Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Search results

Summary of Contents for JUNOS OS 10.3 - SOFTWARE

Reviews:

Related manuals for JUNOS OS 10.3 - SOFTWARE

Brands by name

Popular brands