group-limit
Syntax
group-limit limit;
Hierarchy Level
[edit protocols
igmp-snooping vlan
vlan-id | vlan-number
interface
interface-name]
Release Information
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Description
Configure a limit for the number of multicast groups allowed on the specified interface.
After this limit is reached, new reports are ignored and related flows are not flooded on
the interface.
Default
No group limits are configured.
Options
limit
—Number that represents the maximum number of multicast groups allowed on
the specified interface.
Range:
0 through 65535
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
•
Example: Configuring IGMP Snooping on EX Series Switches on page 2323
•
Configuring IGMP Snooping (CLI Procedure) on page 2331
•
Configuring IGMP Snooping (J-Web Procedure) on page 2332
•
group on page 2366
Copyright © 2010, Juniper Networks, Inc.
2368
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
