Table 304: mtrace from-source Output Fields
(continued)
Field Description
Field Name
IP address receiving the multicast.
Receiver
IP address sending the mtrace query.
Query source
mtrace from-source
user@host>
mtrace from-source source 192.1.4.2 group 225.1.1.1
Mtrace from 192.1.4.2 to 192.1.1.2 via group 225.1.1.1
Querying full reverse path... * *
mtrace from-source
0 routerA.lab.mycompany.net (192.1.1.2)
-1 routerB.lab.mycompany.net (192.1.2.2) PIM thresh^ 1
-2 routerC.lab.mycompany.net (192.1.3.2) PIM thresh^ 1
-3 hostA.lab.mycompany.net (192.1.4.2)
Round trip time 2 ms; total ttl of 2 required.
Waiting to accumulate statistics...Results after 10 seconds:
Source Response Dest Overall Packet Statistics For Traffic From
192.1.4.2 192.1.1.2 Packet 192.1.4.2 To 225.1.1.1
v __/ rtt 2 ms Rate Lost/Sent = Pct Rate
192.1.2.1
192.1.3.2 routerC.lab.mycompany.net
v ^ ttl 2 0/0 = -- 0 pps
192.1.4.1
192.1.2.2 routerB.lab.mycompany.net
v \__ ttl 3 ?/0 0 pps
192.1.1.2 192.1.1.2
Receiver Query Source
Copyright © 2010, Juniper Networks, Inc.
2442
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
