mtrace monitor
Syntax
mtrace monitor
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Listen passively for IP multicast responses.To exit
mtrace monitor
, type Ctrl+c.
Options
none
—Trace the master instance.
Required Privilege
Level
view
List of Sample Output
mtrace monitor on page 2444
Output Fields
Table 305 on page 2443 describes the output fields for the
mtrace monitor
command.
Output fields are listed in the approximate order in which they appear.
Table 305: mtrace monitor Output Fields
Field Description
Field Name
Date and time of the query.
Mtrace query at
Address of the host issuing the query.
by
Response destination.
resp to
Query ID number.
qid
IP address of the query source and default group destination.
packet from...to
IP address of the multicast source and the response address.
from...to
IP address of the group to trace.
via group
Maximum hop setting.
mxhop
2443
Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
