set cli restart-on-upgrade
Syntax
set cli restart-on-upgrade string (off | on)
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
For an individual session, set the CLI to prompt you to restart the router or switch after
upgrading the software.
Options
off
—Disables the prompt.
on
—Enables the prompt.
Required Privilege
Level
view
Related
Documentation
show cli on page 163
•
List of Sample Output
set cli restart-on-upgrade on page 158
Output Fields
When you enter this command, you are provided feedback on the status of your request.
set cli
restart-on-upgrade
user@host>
set cli restart-on-upgrade on
Enabling restart-on-upgrade
set cli
restart-on-upgrade
Copyright © 2010, Juniper Networks, Inc.
158
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
