manualshive.com logo in svg

Juniper JUNOS OS 10.3 - SOFTWARE, Manual

"Get your hands on the free manual for Juniper JUNOS OS 10.3 - SOFTWARE, an innovative networking operating system. Download the comprehensive user manual from 88.208.23.73:8080 to explore the features and functionalities of this cutting-edge product. Seamlessly enhance your networking skills with this essential resource."

Share
Download
background image

Table 310: show igmp-snooping membership Output Fields

(continued)

Level of Output

Field Description

Field Name

detail

List of information about multicast router interfaces:

•

Name of the multicast router interface.

•

static

or

dynamic

—Whether the multicast router interface is static or

dynamic.

•

Uptime

—For static interfaces, amount of time since the interface was

configured as a multicast router interface. For dynamic interfaces, amount
of time since the first query was received on interface.

•

timeout

—Query timeout in seconds.

Router interfaces

detail

IP multicast address of the multicast group.

The following information is provided for the multicast group:

•

Name of the interface belonging to the multicast group.

•

timeout

—Time (in seconds) left until the entry for the multicast group is

removed.

•

Last reporter

—Last host to report membership for the multicast group.

•

Receiver count

—Number of interfaces that have membership in a multicast

group.

•

Flags

—IGMP version of the host sending a join message.

•

Include source

—Source addresses from which multicast streams are

allowed based on IGMPv3 reports. Shown only for IGMPv3 joins.

Group

show igmp-snooping

membership

user@switch> 

show igmp-snooping membership

VLAN: vlan24
    224.1.1.1      *

show igmp-snooping

membership

        Interfaces: ge-0/0/0.0
    224.1.1.100    *
        Interfaces: ge-0/0/0.0
    225.1.1.100    *
        Interfaces: ge-0/0/0.0

show igmp-snooping

membership detail

user@switch> 

show igmp-snooping membership detail

VLAN: vlan24 Tag: 24 (Index: 3)
  Router interfaces:
    ge-0/0/8.0 dynamic Uptime: 00:08:35 timeout: 254
  Group: 224.1.1.1
    ge-0/0/0.0 timeout: 223 Receiver count: 1, Flags: <V2-hosts Static>
  Group: 224.1.1.100     
    ge-0/0/0.0 timeout: 170 Last reporter: 10.10.1.10 Receiver count: 1, Flags:
    <V2-hosts>
  Group: 225.1.1.100
    ge-0/0/0.0 timeout: 168 Last reporter: 10.10.1.10 Receiver count: 1, Flags:
    <V2-hosts> 

Copyright © 2010, Juniper Networks, Inc.

2458

Complete Software Guide for Junos

®

OS for EX Series Ethernet Switches, Release 10.3

Summary of Contents for JUNOS OS 10.3 - SOFTWARE











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOS OS 10.3 - SOFTWARE

Garmin ecoRoute Owner'S Manual Supplement preview
ecoRoute
Brand: Garmin Pages: 8
MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Brand: MACROMEDIA Pages: 72
Tech Source RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND Installation And Reference Manual preview
RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND
Brand: Tech Source Pages: 36
Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual preview
ETERNUS VSS Hardware Provider 2.1
Brand: Fujitsu Pages: 134
Fujitsu ATLAS V14 User Manual preview
ATLAS V14
Brand: Fujitsu Pages: 302
Fujitsu PFU Rack2-Filer User Manual preview
PFU Rack2-Filer
Brand: Fujitsu Pages: 463
Fujitsu Eternus web GUI User Manual preview
Eternus web GUI
Brand: Fujitsu Pages: 635
Fujitsu ETERNUS User Manual preview
ETERNUS
Brand: Fujitsu Pages: 64
Sling Media Slingbox User Manual preview
Slingbox
Brand: Sling Media Pages: 112
Brother Wi-Fi Direct Manual preview
Wi-Fi Direct
Brand: Brother Pages: 24
Brother MacBroidery„ Embroidery Lettering Software for Mac Manual preview
MacBroidery„ Embroidery Lettering Software for Mac
Brand: Brother Pages: 56
Brother Quattro 6000D User Manual preview
Quattro 6000D
Brand: Brother Pages: 48
Brother PE-Design 6 Instruction Manual preview
PE-Design 6
Brand: Brother Pages: 272
Brother PE-DESIGN 2.0 Instruction Manual preview
PE-DESIGN 2.0
Brand: Brother Pages: 200
Panasonic PTF100NTU - LCD PROJECTOR Specifications preview
PTF100NTU - LCD PROJECTOR
Brand: Panasonic Pages: 2
Panasonic SZ-CB8P Operating Instructions preview
SZ-CB8P
Brand: Panasonic Pages: 4
Panasonic PT-LW80NT Spec File preview
PT-LW80NT
Brand: Panasonic Pages: 10
Panasonic Media Manager V2.1 Basic Operating Instructions Manual preview
Media Manager V2.1
Brand: Panasonic Pages: 28

Brands by name

Popular brands

Load more brands