•
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2580
•
Configuring LLDP-MED (CLI Procedure) on page 2624
ca-value
Syntax
ca-value value;
Hierarchy Level
[edit protocols
lldp-med interface
(all | interface-name )
location civic-based ca-type
number]
Release Information
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
For Link Layer Discovery Protocol–Media Endpoint Device (LLDP-MED), configure location
information, such as street address and city, that is indexed by the ca-type code. This
information is advertised from the switch to the MED and is used during emergency calls
to identify the location of the MED.
Default
Disabled.
Options
value
—Specify a value that correlates to the
ca-type
. See ca-type for a list of codes and
suggested values.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
•
show lldp on page 2769
•
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2580
•
Configuring LLDP-MED (CLI Procedure) on page 2624
2665
Copyright © 2010, Juniper Networks, Inc.
Chapter 85: Configuration Statements for Access Control
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
