Table 355: show lldp Output Fields
(continued)
Level of Output
Field Description
Field Name
detail
LLDP-MED TLVs supported on the switch:
•
LLDP MED capabilities
—TLV that advertises the primary function of the port.
The capabilities values range from 0 through 15:
•
0
—Capabilities
•
1
—Network Policy
•
2
—Location Identification
•
3
—Extended Power via MDI-PSE
•
4
—Inventory
•
5–15
—Reserved
•
Network policy
—TLV that advertises the port VLAN configuration and
associated Layer 2 and Layer 3 attributes. Attributes include the policy
identifier, application types—such as voice or streaming video—802.1Q VLAN
tagging, and 802.1p priority bits and DiffServ code points.
•
Endpoint location
—TLV that advertises the physical location of the endpoint.
•
Extended power Via MDI
—TLV that advertises the power type, power source,
power priority, and power value of the port. It is the responsibility of the PSE
device (network connectivity device) to advertise the power priority on a port.
Supported LLDP MED
TLVs
show lldp
user@switch>
show lldp
LLDP : Enabled
show lldp
Advertisement interval : 30 seconds
Transmit delay : 2 seconds
Hold timer : 4 seconds
Notification interval : 0 Second(s)
Config Trap Interval : 0 seconds
Connection Hold timer : 300 seconds
LLDP MED : Disabled
MED fast start count : 3 Packets
Interface Parent Interface LLDP LLDP-MED
all - Enabled -
me0.0 - Disabled -
show lldp detail
user@switch>
show lldp detail
LLDP : Enabled
Advertisement interval : 30 seconds
Transmit delay : 2 seconds
Hold timer : 4 seconds
Notification interval : 0 Second(s)
Config Trap Interval : 0 seconds
Connection Hold timer : 300 seconds
LLDP MED : Disabled
MED fast start count : 3 Packets
Interface Parent Interface LLDP LLDP-MED Neighbor count
Copyright © 2010, Juniper Networks, Inc.
2772
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
