Juniper JUNOS OS 10.3 - SOFTWARE Manual Download | Manualshive

Page: 2934 / 3946

background image

Understanding MAC Limiting and MAC Move Limiting for Port Security on EX Series
Switches

MAC limiting protects against flooding of the Ethernet switching table (also known as
the MAC forwarding table or Layer 2 forwarding table). You enable this feature on
interfaces (ports). MAC move limiting detects MAC movement and MAC spoofing on
access interfaces. You enable this feature on VLANs.

•

MAC Limiting on page 2838

•

MAC Move Limiting on page 2838

•

Actions for MAC Limiting and MAC Move Limiting on page 2839

•

MAC Addresses That Exceed the MAC Limit or MAC Move Limit on page 2839

MAC Limiting

MAC limiting sets a limit on the number of MAC addresses that can be learned on a single
Layer 2 access interface or on all the Layer 2 access interfaces on the switch. Junos
operating system (Junos OS) provides two MAC limiting methods:

•

Maximum number of MAC addresses—You configure the maximum number of dynamic
MAC addresses allowed per interface. When the limit is exceeded, incoming packets
with new MAC addresses are treated as specified by the configuration. The incoming
packets with new MAC addresses can be ignored, dropped, logged, or the interface
can be shut down or temporarily disabled. Note that static MAC addresses do not
count toward the limit you specify for dynamic MAC addresses.

•

Allowed MAC—You configure specific “allowed” MAC addresses for the access interface.
Any MAC address that is not in the list of configured addresses is not learned and the
switch logs the message. Allowed MAC binds MAC addresses to a VLAN so that the
address does not get registered outside the VLAN. If an allowed MAC setting conflicts
with a dynamic MAC setting, the allowed MAC setting takes precedence.

NOTE:

If you do not want the switch to log messages received for invalid

MAC addresses on an interface that has been configured for specific “allowed”
MAC addresses, you can disable the logging by configuring the

no-allowed-mac-log

statement.

MAC Move Limiting

MAC move limiting causes the switch to track the number of times a MAC address can
move to a new interface (port). It can help to prevent MAC spoofing, and it can also
detect and prevent loops.

If a MAC address moves more than the configured number of times within one second,
the switch performs the configured action. You can configure MAC move limiting to apply
to all VLANs or to a specific VLAN.

Copyright © 2010, Juniper Networks, Inc.

2838

Complete Software Guide for Junos

®

OS for EX Series Ethernet Switches, Release 10.3

«
...
2932
2933
2934
2935
2936
...
»

Summary of Contents for JUNOS OS 10.3 - SOFTWARE











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOS OS 10.3 - SOFTWARE

Brand: Native Instruments Pages: 74

Brand: Valcom Pages: 5

Brand: VegaStream Pages: 33

WS02-NCTC1-E - 07-2001

Brand: Omron Pages: 116

FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH

Brand: MACROMEDIA Pages: 830

ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER

Brand: KAPERSKY Pages: 67

ENTERPRISE LINUX WS 2.1 -

Brand: Red Hat Pages: 110

FastTrak SX Series Version 4.4

Brand: Promise Technology Pages: 102

Brand: Zing Magic Pages: 10

Brand: GRASS VALLEY Pages: 174

Brand: Juniper Pages: 14

9235 - Coolscan III

Brand: Nikon Pages: 153

VIDEOCAM SLIMCLIP

Brand: Genius Pages: 7

SAMREPORT-LITE 2005

Brand: Macrovision Corporation Pages: 44

FLEX-FLEX BUILDER

Brand: MACROMEDIA Pages: 56

Brand: KapLogic Pages: 24

HISCDE-AB-IA - Host Intrusion Prevention

Brand: McAfee Pages: 154

Brand: Xerox Pages: 308

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands