Figure 74: Network Topology for Port Security Setup with Two Switches
on the Same VLAN
The components of the topology for this example are shown in Table 371 on page 2875.
Table 371: Components of Port Security Setup on Switch 1 with a DHCP Server Connected to
Switch 2
Settings
Properties
One EX3200-24P (Switch 1), and an additional EX Series switch
(Switch 2)
Switch hardware
employee-vlan
, tag
20
VLAN name and ID
192.0.2.16/28
192.0.2.17
through
192.0.2.30
192.0.2.31
is subnet's broadcast address
VLAN subnets
ge-0/0/11
Trunk interface on both switches
ge-0/0/1
,
ge-0/0/2
, and
ge-0/0/3
Access interfaces on Switch 1
ge-0/0/1
Access interface on Switch 2
ge-0/0/1
on Switch 2
Interface for DHCP server
Switch 1 is initially configured with the default port security setup. In the default
configuration on the switch:
2875
Copyright © 2010, Juniper Networks, Inc.
Chapter 94: Examples: Port Security Configuration
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
