Configuring Firewall Filters (J-Web Procedure)
You configure firewall filters on EX Series switches to control traffic that enters ports on
the switch or enters and exits VLANs on the network and Layer 3 (routed) interfaces. To
configure a firewall filter you must configure the filter and then apply it to a port, VLAN,
or Layer 3 interface.
To configure firewall filter settings using the J-Web interface:
1.
Select
Configure
>
Security
>
Filters
.
The Firewall Filter Configuration page displays a list of all configured port/VLAN or
router filters and the ports or VLANs associated with a particular filter.
NOTE:
After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select Commit Options > Commit. See Using the
Commit Options to Commit Configuration Changes for details about all
commit options.
2.
Click one:
•
Add—Select this option to create a new filter. Enter information as specified in Table
387 on page 3069.
•
Edit—Select this option to edit an existing filter. Enter information as specified in
Table 387 on page 3069.
•
Delete—Select this option to delete a filter.
•
Term Up—Select this option to move a term up in the filter term list.
•
Term Down—Select this option to move a term down in the filter term list.
Table 387: Create a New Filter
Your Action
Function
Field
Filter tab
Select the filter type.
Specifies the filter type: port/VLAN firewall filter or
router firewall filter.
Filter type
Enter a name.
Specifies the name for the filter.
Filter name
Click
Add
to add new terms. Enter
information as specified in Table 388 on
page 3070 and Table 389 on page 3071.
Specifies the terms to be associated with the filter. Add
new terms or edit existing terms.
Select terms to be part
of the filter
Association tab
3069
Copyright © 2010, Juniper Networks, Inc.
Chapter 102: Configuring Firewall Filters
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
