show policy conditions
Syntax
show policy conditions
<condition-name>
<detail>
<dynamic>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switch)
show policy conditions
<condition-name>
<detail>
<dynamic>
Release Information
Command introduced in Junos OS Release 9.0.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Display all the configured conditions as well as the routing tables with which the
configuration manager is interacting. If the
detail
keyword is included, the output also
displays dependent routes for each condition.
Options
none
—Display all configured conditions and associated routing tables.
condition-name
—(Optional) Display information about the specified condition only.
detail
—(Optional) Display the specified level of output.
dynamic
—(Optional) Display information about the conditions in the dynamic database.
logical-system (all |
logical-system-name
)
—(Optional) Perform this operation on all logical
systems or on a particular logical system.
Required Privilege
Level
view
List of Sample Output
show policy conditions detail on page 3141
Output Fields
Table 401 on page 3140 lists the output fields for the
show policy conditions
command.
Output fields are listed in the approximate order in which they appear.
Table 401: show policy conditions Output Fields
Level of Output
Field Description
Field Name
All levels
Name of configured condition.
Condition
All levels
Condition type. If the
if-route-exists
option is configured, the event type is:
Existence of a route in a specific routing table
.
event
detail
List of routes dependent on the condition, along with the latest generation
number.
Dependent routes
All levels
List of routing tables associated with the condition, along with the latest
generation number and number of dependencies.
Condition tables
Copyright © 2010, Juniper Networks, Inc.
3140
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
