NOTE:
After you make changes to the configuration in this page, you must
commit the changes immediately for them to take effect. To commit all
changes to the active configuration, select Commit Options > Commit.
See Using the Commit Options to Commit Configuration Changes for
details about all commit options.
2.
Click one:
•
Add
—Adds a forwarding class. Enter information into the forwarding class page as
described in Table 416 on page 3209.
•
Edit
—Modifies an existing forwarding class. Enter information into the forwarding
class page as described in Table 416 on page 3209.
•
Delete
—Deletes an existing forwarding class.
Table 416: Forwarding Classes Configuration Fields
Your Action
Function
Field
Forwarding Class Summary
To specify an internal queue number, select an
integer from 0 through 7, appropriate for your
platform.
Specifies the internal queue numbers to which
forwarding classes are assigned.
By default, if a packet is not classified, it is
assigned to the class associated with queue 0.
You can have more than one forwarding class
to a queue number.
Queue #
Type the name—for example,
be-class
.
Specifies the forwarding class names assigned
to specific internal queue numbers.
By default, four forwarding classes are assigned
to queue numbers 0 (best-effort), 1
(assured-forwarding), 5
(expedited-forwarding), and 7
(network-connect).
Forwarding Class Name
Related
Documentation
Defining CoS Forwarding Classes (CLI Procedure) on page 3208
•
•
Example: Configuring CoS on EX Series Switches on page 3173
•
Monitoring CoS Forwarding Classes on page 3228
•
Assigning CoS Components to Interfaces (J-Web Procedure) on page 3219
•
Understanding CoS Forwarding Classes on page 3156
Defining CoS Schedulers (CLI Procedure)
You use schedulers to define the class-of-service (CoS) properties of output queues.
These properties include the amount of interface bandwidth assigned to the queue, the
3209
Copyright © 2010, Juniper Networks, Inc.
Chapter 109: Configuring CoS
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
