the scheduler map being used by the currently operating interfaces in a port group, the
default scheduler map is used by all interfaces in a port group, even the currently operating
ones, when you bring the interface up.
To change the scheduler map assigned to a port group:
1.
Delete the current scheduler map from the interfaces (
xe-0/0/1
and
xe-0/0/2
) it is
currently assigned to:
[edit class-of-service interfaces]
user@switch#
delete xe-0/0/1 scheduler-map
[edit class-of-service interfaces]
user@switch#
delete xe-0/0/2 scheduler-map
2.
Assign the new scheduler map (
ef-map
) to at least one interface in the port group:
[edit class-of-service interfaces]
user@switch#
set xe-0/0/1 scheduler-map ef-map
Related
Documentation
Defining CoS Schedulers (J-Web Procedure) on page 3211
•
•
Example: Configuring CoS on EX Series Switches on page 3173
•
Assigning CoS Components to Interfaces (CLI Procedure) on page 3219
•
Monitoring CoS Scheduler Maps on page 3231
•
Understanding CoS Schedulers on page 3160
Defining CoS Schedulers (J-Web Procedure)
You can use the J-Web interface to define CoS schedulers on an EX Series switch. Using
schedulers, you can assign attributes to queues and thereby provide congestion control
for a particular class of traffic. These attributes include the amount of interface bandwidth,
memory buffer size, transmit rate, and schedule priority.
To configure schedulers:
1.
Select
Configure
>
Class of Service
>
Schedulers
.
NOTE:
After you make changes to the configuration in this page, you must
commit the changes immediately for them to take effect. To commit all
changes to the active configuration, select Commit Options > Commit.
See Using the Commit Options to Commit Configuration Changes for
details about all commit options.
2.
Click one:
•
Add
—Adds a scheduler. Enter information into the schedulers page as described in
Table 417 on page 3212.
3211
Copyright © 2010, Juniper Networks, Inc.
Chapter 109: Configuring CoS
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
