configure
Syntax
configure
<dynamic>
<exclusive>
<private>
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Enter configuration mode. When this command is entered without any optional keywords,
everyone can make configuration changes and commit all changes made to the
configuration.
Options
none
—Enter configuration mode.
dynamic
—(Optional) Configure routing policies and certain routing policy objects in a
dynamic database that is not subject to the same verification required in the standard
configuration database. As a result, the time it takes to commit changes to the
dynamic database is much shorter than for the standard configuration database.
You can then reference these policies and policy objects in routing policies you
configure in the standard database.
exclusive
—(Optional) Lock the candidate configuration for as long as you remain in
configuration mode, allowing you to make changes without interference from other
users. Other users can enter and exit configuration mode, but they cannot change
the configuration.
private
—(Optional) Allow multiple users to edit different parts of the configuration at
the same time and to commit only their own changes, or to roll back without
interfering with one another's changes. You cannot commit changes in configure
private mode when another user is in configure exclusive mode.
Additional Information
For more information about the different methods of entering configuration mode and
the restrictions that apply, see the
Junos System Basics Configuration Guide
.
Required Privilege
Level
configure
Related
Documentation
show configuration on page 288
•
List of Sample Output
configure on page 235
Output Fields
When you enter this command, you are placed in configuration mode and the system
prompt changes from
hostname>
to
hostname#
.
configure
user@host>
configure
Entering configuration mode
[edit]
user@host#
configure
235
Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Operational Mode Commands for System Setup
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
