interface
Syntax
interface (all | interface-name) {
disable
;
maximum-power
watts;
priority
(high | low);
telemetries
{
disable
;
duration
hours;
interval
minutes;
}
}
Hierarchy Level
[edit poe]
Release Information
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Specify a PoE interface to be configured.
Options
all
—All PoE interfaces on the switch that have not been individually configured for PoE.
If a PoE interface has been individually configured, that configuration overrides any
settings specified with
all
.
interface-name
—Name of the specific interface being configured.
If you use the
interface
statement without any substatements, PoE is enabled on all
interfaces or the specified interface with default values for the remaining statements.
The remaining statements are explained separately.
Required Privilege
Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related
Documentation
•
Example: Configuring PoE Interfaces with Different Priorities on an EX Series Switch
on page 3309
•
Configuring PoE (CLI Procedure) on page 3315
Copyright © 2010, Juniper Networks, Inc.
3332
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
