On a TX Matrix Plus router, power off all T1600 routers (or line-card chassis)
connected to the TX Matrix Plus router.
all-members
—(EX4200 switches only) (Optional) Power off all members of the Virtual
Chassis configuration.
at
time
—(Optional) Time at which to power off the software, specified in one of the
following ways:
•
now
—Power off the software immediately. This is the default.
•
+minutes
—Number of minutes from now to power off the software.
•
yymmddhhmm
—Absolute time at which to power off the software, specified as
year, month, day, hour, and minute.
•
hh:mm
—Absolute time on the current day at which to power off the software.
both-routing-engines
—(Optional) Power off both Routing Engines at the same time.
in
minutes
—(Optional) Number of minutes from now to power off the software. This
option is an alias for the
at +minutes
option.
lcc
number
—(Optional) (TX Matrix and TX Matrix Plus router only) On a TX Matrix router,
power off a T640 router that is connected to the TX Matrix router. On a TX Matrix
Plus router, power off a T1600 router that is connected to the TX Matrix Plus router.
Replace
number
with a value from
0
through
3
.
local
—(EX4200 switches only) (Optional) Power off the local Virtual Chassis member.
media (compact-flash | disk | removable-compact-flash | usb)
—(Optional) Boot medium
for next boot. (The options
removable-compact-flash
and
usb
pertain to the J Series
routers only.)
media (external | internal)
—(EX Series switches only) (Optional) Power off the boot
media:
•
external
—Power off the external mass storage device.
•
internal
—Power off the internal flash device.
member
member-id
—(EX4200 switches only) (Optional) Power off the specified member
of the Virtual Chassis configuration. Replace
member-id
with a value from 0 through
9.
message "
text
"
—(Optional) Message to display to all system users before powering off
the software.
other-routing-engine
—(Optional) Power off the other Routing Engine from which the
command is issued. For example, if you issue the command from the master Routing
Engine, the backup Routing Engine is halted. Similarly, if you issue the command
from the backup Routing Engine, the master Routing Engine is halted.
Copyright © 2010, Juniper Networks, Inc.
250
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
