address 10.1.6.1/24;
}
family mpls;
}
}
}
ae0 {
unit 0 {
family inet {
address 10.1.9.1/24;
}
family mpls;
}
}
lo0 {
unit 0 {
family inet {
address 127.1.1.2/32;
}
}
}
protocols {
rsvp {
interface lo0.0;
interface ge-0/0/5.0;
interface ge-0/0/6.0;
interface ae0.0;
}
mpls {
interface ge-0/0/5.0;
interface ge-0/0/6.0;
interface ae0.0;
}
ospf {
traffic-engineering;
area 0.0.0.0 {
interface lo0.0;
interface ge-0/0/5.0;
interface ge-0/0/6.0;
interface ae0.0;
}
}
Verification
To confirm that the configuration is working properly, perform these tasks:
•
Verifying the Physical Layer on the Switches on page 3377
•
Verifying the Routing Protocol on page 3377
•
Verifying the Core Interfaces Being Used for the MPLS Traffic on page 3377
•
Verifying RSVP on page 3378
•
Verifying the Assignment of Interfaces for MPLS Label Operations on page 3378
•
Verifying the Status of the CCC on page 3378
Copyright © 2010, Juniper Networks, Inc.
3376
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
