manualshive.com logo in svg

Juniper JUNOS OS 10.3 - SOFTWARE, Manual

"Get your hands on the free manual for Juniper JUNOS OS 10.3 - SOFTWARE, an innovative networking operating system. Download the comprehensive user manual from 88.208.23.73:8080 to explore the features and functionalities of this cutting-edge product. Seamlessly enhance your networking skills with this essential resource."

Share
Download
background image

Table 462: show link-management te-link Output Fields

(continued)

Field Description

Field Name

Type of switching that can be performed on the traffic-engineered link. Supported values are

PSC-1

and

Packet

.

Switching

Smallest single allocation of bandwidth, in bits per second (bps) or megabits per second (Mbps),
possible on the traffic-engineered link. This number is equal to the smallest bandwidth interface that
is a member of the traffic-engineered link.

Minimum bandwidth

Largest single allocation of bandwidth, in bps or Mbps, possible on the traffic-engineered link. This
number is equal to the largest bandwidth interface that is a member of the link.

Maximum bandwidth

Sum of the bandwidth, in bps or Mbps, of all interfaces that are members of the link (in bps).

Total bandwidth

Sum of the bandwidth, in bps or Mbps, of all interfaces that are members of the link and that are not
yet allocated.

Available Bandwidth

Name of the interface.

Name

State of the interface:

Up

or

Down

.

State

Identifier of the local side of the interface.

Local ID

Identifier of the remote side of the interface.

Remote ID

Bandwidth, in bps or Mbps, of the member interface.

Bandwidth

Whether the resource is allocated to an LSP:

Yes

or

No

.

Used

LSP name.

LSP-name

show

link-management

te-link

user@host> 

show link-management te-link

TE link name: FA-bd, State: Up
  Local identifier: 4144, Remote identifier: 0, Local address: 2.2.2.1, 
  Remote address: 2.2.2.2, Encoding: Ethernet, Switching: Packet, 

show

link-management

te-link

  Minimum bandwidth: 0bps, Maximum bandwidth: 0bps, Total bandwidth: 0bps,   
Available bandwidth: 0bps
    Name        State Local ID  Remote ID      Bandwidth Used  LSP-name
    falsp-bd    Dn       43077          0           0bps No

 TE link name: FA-be, State: Up
  Local identifier: 4145, Remote identifier: 0, Local address: 1.1.1.1, 
   Remote address: 1.1.1.2, Encoding: Ethernet, Switching: Packet, 
  Minimum bandwidth: 0bps, Maximum bandwidth: 10Mbps, Total bandwidth: 10Mbps,  
 Available bandwidth: 8Mbps
    Name        State Local ID  Remote ID      Bandwidth Used  LSP-name
    falsp-be    Up       43076          0         10Mbps  Yes  e2elsp-bf

Copyright © 2010, Juniper Networks, Inc.

3474

Complete Software Guide for Junos

®

OS for EX Series Ethernet Switches, Release 10.3

Summary of Contents for JUNOS OS 10.3 - SOFTWARE











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOS OS 10.3 - SOFTWARE

EAW Resolution Introduction Manual preview
Resolution
Brand: EAW Pages: 36
Xerox C8 - DocuPrint Color Inkjet Printer User Manual preview
C8 - DocuPrint Color Inkjet Printer
Brand: Xerox Pages: 458
Xerox FreeFlow Important Installation Information preview
FreeFlow
Brand: Xerox Pages: 2
Xerox C8 - DocuPrint Color Inkjet Printer Manual preview
C8 - DocuPrint Color Inkjet Printer
Brand: Xerox Pages: 51
VMware VFABRIC GEMFIRE Datasheet preview
VFABRIC GEMFIRE
Brand: VMware Pages: 2
Olympus CAMEDIA Master Software Installation Manual preview
CAMEDIA Master
Brand: Olympus Pages: 2
FARONICS DEVICE FILTER MAC Manual preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 30
Panasonic LightPen3 Operating Instructions Manual preview
LightPen3
Brand: Panasonic Pages: 27
Panasonic LUMIX Simple Viewer Operating Instructions Manual preview
LUMIX Simple Viewer
Brand: Panasonic Pages: 32
BT Voyager Digital Media Player Installation & User Manual preview
Voyager Digital Media Player
Brand: BT Pages: 30
AirLive AIRTV-1000U User Manual preview
AIRTV-1000U
Brand: AirLive Pages: 19
AMX BCS Instruction Manual preview
BCS
Brand: AMX Pages: 53
Red Hat ENTERPRISE LINUX 5 - DM MULTIPATH Configuration And Administration Manual preview
ENTERPRISE LINUX 5 - DM MULTIPATH
Brand: Red Hat Pages: 42
Autodesk AUTOCAD P AND ID 2010 Brochure preview
AUTOCAD P AND ID 2010
Brand: Autodesk Pages: 4
Autodesk 657B1-000110-S001 - Maya - Mac Getting Started Manual preview
657B1-000110-S001 - Maya - Mac
Brand: Autodesk Pages: 5
MACROMEDIA FLASH 8-USING FLASH Use Manual preview
FLASH 8-USING FLASH
Brand: MACROMEDIA Pages: 678
Xilinx LogiCORE 1000BASE-X User Manual preview
LogiCORE 1000BASE-X
Brand: Xilinx Pages: 230
KAPERSKY SECURITY 5.5 - FOR PDA User Manual preview
SECURITY 5.5 - FOR PDA
Brand: KAPERSKY Pages: 66

Brands by name

Popular brands

Load more brands