Table 478: show ted database Output Fields
(continued)
Level of Output
Field Description
Field Name
extensive
Information about the interface switching capability descriptor, which is a
subtype length value (TLV) of the link TLV.
n
is the index number.
•
Switching type
—Type of switching to be performed on a particular link:
•
PSC-1
—Packet switch-capable 1
•
PSC-2
—Packet switch-capable 2
•
PSC-3
—Packet switch-capable 3
•
PSC-4
—Packet switch-capable 4
•
L2SC
—Layer-2-switch-capable
•
TDM
—Time-division-multiplexing-capable
•
LSC
—Lambda switch-capable
•
FSC
—Fiber switch-capable
•
Encoding type
—Encoding of the LSP being requested:
•
Packet
•
Ethernet
•
ANSI/ETSI PDH
•
Reserved
•
SDH /SONET
•
Digital Wrapper
•
Lambda (photonic)
•
Fiber
•
FiberSDH/SONET
•
Maximum LSP BW [priority] bps
—Maximum LSP bandwidth information.
Amount of bandwidth actually reserved for each priority level. The bandwidth
shown is for the entire interface.
•
[n]
—Priority level. The range is from
0
(high) through
7
(low).
•
n Mbps
—Amount of the maximum bandwidth.
•
Minimum LSP BW
—Minimum LSP bandwidth in Mbps. Amount of bandwidth
actually reserved for each priority level. The bandwidth shown is for the entire
interface.
Minimum LSP BW
is displayed only when
switching type
is
PSC-1
or
TDM
.
•
Interface MTU
—Displayed only when
switching type
is
TDM
.
•
Interface supports standard SONET/SDH
—Displayed only when
switching
type
is
TDM
.
Interface
Switching
Capability
Descriptor (n)
show ted database
brief
user@host>
show ted database brief
TED database: 6 ISIS nodes 6 INET nodes
ID Type Age(s) LnkIn LnkOut Protocol
show ted database
brief
cheviot.00(123.456.1.10) Rtr 383 1 1 IS-IS(2) IS-IS(1)
corriedale.00(123.456.1.11) Rtr 36 2 0 IS-IS(2) IS-IS(1)
wolff.00(123.456.1.12) Rtr 399 0 0 IS-IS(2) IS-IS(1)
perendale.00(123.456.1.13) Rtr 385 2 0 IS-IS(2) IS-IS(1)
merino.00(123.456.1.14) Rtr 379 1 3 IS-IS(2) IS-IS(1)
romney.00(123.456.1.15) Rtr 427 0 2 IS-IS(2) IS-IS(1)
3531
Copyright © 2010, Juniper Networks, Inc.
Chapter 126: Operational Mode Commands for MPLS
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
