rising-threshold
Syntax
rising-threshold integer;
Hierarchy Level
[edit snmp rmon
alarm
index]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Upper threshold for the sampled variable. When the current sampled value is greater
than or equal to this threshold, and the value at the last sampling interval is less than
this threshold, a single event is generated. A single event is also generated if the first
sample after this entry becomes valid is greater than or equal to this threshold, and the
associated startup alarm value is equal to the falling alarm or rising or falling alarm value.
After a rising event is generated, another rising event cannot be generated until the
sampled value falls below this threshold and reaches the falling threshold.
Options
integer
—The lower threshold for the alarm entry.
Range:
–2,147,483,648 through 2,147,483,647
Required Privilege
Level
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Related
Documentation
•
Configuring the Falling Threshold or Rising Threshold
•
falling-threshold on page 3622
rmon
Syntax
rmon { ... }
Hierarchy Level
[edit snmp]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Configure Remote Monitoring.
Required Privilege
Level
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Related
Documentation
•
Configuring an Alarm Entry and Its Attributes
Copyright © 2010, Juniper Networks, Inc.
3640
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
