Table 490: show snmp rmon Output Fields
(continued)
Level of Output
Field Description
Field Name
All levels
State of the alarm or event entry:
Alarms:
•
active
—Entry is fully configured and activated.
•
falling threshold crossed
—Value of the variable has crossed the lower
threshold limit.
•
rising threshold crossed
—Value of the variable has crossed the upper
threshold limit.
•
under creation
—Entry is being configured and is not yet activated.
•
startup
—Alarm is waiting for the first sample of the monitored variable.
•
object not available
—Monitored variable of that type is not available to the
SNMP agent.
•
instance not available
—Monitored variable's instance is not available to the
SNMP agent.
•
object type invalid
—Monitored variable is not a numeric value.
•
object processing errored
—An error occurred when the monitored variable
was processed.
•
unknown
—State is not one of the above.
Events:
•
active
—Entry has been fully configured and activated.
•
under creation
—Entry is being configured and is not yet activated.
•
unknown
—State is not one of the above.
State
All levels
Name of the SNMP object instance being monitored.
Variable name
All levels
Event identifier.
Event Index
detail
Type of notification made when an event is triggered. It can be one of the
following:
•
log
—A system log message is generated and an entry is made to the log table.
•
snmptrap
—An SNMP trap is sent to the configured destination.
•
log and trap
—A system log message is generated, an entry is made to the log
table, and an SNMP trap is sent to the configured destination.
•
none
—Neither log nor trap will be sent.
Type
brief
Date and time of the last event. It has the format
yyyy-mm-dd hh:mm:ss
timezone
.
Last Event
detail
Identifies the trap group used for sending the SNMP trap.
Community
detail
Object ID to which the variable name is resolved. The format is
x.x.x.x
.
Variable OID
detail
Method of sampling the monitored variable and calculating the value to compare
against the upper and lower thresholds. It can have the value of
absolute value
or
delta value
.
Sample type
Copyright © 2010, Juniper Networks, Inc.
3686
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
