Table 50: show ntp associations Output Fields
(continued)
Field Description
Field Name
Peer name and status of the peer in the clock selection process:
•
space—Discarded because of a high stratum value or failed sanity checks.
•
x
—Designated "falseticker", by the intersection algorithm.
•
.
—Culled from the end of the candidate list.
•
–
—Discarded by the clustering algorithm.
•
+
—Included in the final selection set.
•
#
—Selected for synchronization, but the distance exceeds the maximum.
•
*
—Selected for synchronization.
•
o
—Selected for synchronization, but the packets-per-second (pps) signal is in use.
peer-name
show ntp associations
user@host>
show ntp associations
remote refid st t when poll reach delay offset disp
==============================================================================
*wolfe-gw.junipe tick.ucla.edu 2 u 43 64 377 1.86 0.319 0.08
show ntp associations
293
Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Operational Mode Commands for System Setup
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
