scc
—(TX Matrix routers only) (Optional) Show time since the system rebooted and
processes started for the TX Matrix router (or switch-card chassis).
sfc
number
—(TX Matrix Plus routers only) (Optional) Show time since the system rebooted
and processes started for the TX Matrix Plus router (or switch-fabric chassis). Replace
number
with
0
.
Additional Information
By default, when you issue the
show system uptime
command on a TX Matrix or TX
Matrix Plus master Routing Engine, the command is broadcast to all the T640 (in a
routing matrix based on a TX Matrix router) or T1600 (in a routing matrix based on a TX
Matrix Plus router) master Routing Engines connected to it. Likewise, if you issue the
same command on the TX Matrix or TX Matrix Plus backup Routing Engine, the command
is broadcast to all the T640 (in a routing matrix based on a TX Matrix router) or T1600
(in a routing matrix based on a TX Matrix Plus router) backup Routing Engines that are
connected to it.
Required Privilege
Level
view
List of Sample Output
show system uptime on page 316
show system uptime all-lcc (TX Matrix Router) on page 317
show system uptime all-lcc (TX Matrix Plus Router) on page 317
Output Fields
Table 54 on page 316 describes the output fields for the
show system uptime
command.
Output fields are listed in the approximate order in which they appear.
Table 54: show system uptime Output Fields
Field Description
Field Name
Current system time in UTC.
Current time
Date and time when the Routing Engine on the router or switch was last booted and how long it has
been running.
System booted
Date and time when the routing protocols were last started and how long they have been running.
Protocols started
Date and time when a configuration was last committed. Also shows name of user who issued the
last
commit
command.
Last configured
Current time, in the local time zone, and how long the router or switch has been operational.
time and up
Number of users logged in to the router or router.
users
Load averages for the last 1 minute, 5 minutes, and 15 minutes.
load averages
show system uptime
user@host>
show system uptime
Current time: 1998-10-13 19:45:47 UTC
System booted: 1998-10-12 20:51:41 UTC (22:54:06 ago)
show system uptime
Protocols started: 1998-10-13 19:33:45 UTC (00:12:02 ago)
Last configured: 1998-10-13 19:33:45 UTC (00:12:02 ago) by abc
12:45PM up 22:54, 2 users, load averages: 0.07, 0.02, 0.01
Copyright © 2010, Juniper Networks, Inc.
316
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
