show task replication
Syntax
show task replication
Release Information
Command introduced in Junos OS Release 8.5.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Displays graceful Routing Engine switchover (GRES) and nonstop active routing (NSR)
status. When you issue this command on the master Routing Engine, the status of nonstop
active routing synchronization is also displayed.
Options
This command has no options.
Required Privilege
Level
view
List of Sample Output
show task replication (Issued on the Master Routing Engine) on page 355
show task replication (Issued on the Backup Routing Engine) on page 355
Output Fields
Table 57 on page 355 lists the output fields for the
show task replication
command. Output
fields are listed in the approximate order in which they appear.
Table 57: show task replication Output Fields
Field Description
Field Name
Displays whether or not graceful Routing Engine switchover is
configured. The status can be
Enabled
or
Disabled
.
Stateful replication
Displays the Routing Engine on which the command is issued:
Master
,
Backup
, or
Not applicable
(when the router has only one
Routing Engine).
RE mode
Protocol that are supported by nonstop active routing.
Protocol
Nonstop active routing synchronization status for the supported
protocols. States are
NotStarted
,
InProgress
, and
Complete
.
Synchronization Status
show task replication
(Issued on the Master
Routing Engine)
user@host>
show task replication
Stateful Replication: Enabled
RE mode: Master
show task replication
(Issued on the Master
Routing Engine)
Protocol Synchronization Status
OSPF NotStarted
BGP Complete
IS-IS NotStarted
LDP Complete
show task replication
(Issued on the Backup
Routing Engine)
user@host>
show task replication
Stateful Replication: Enabled
RE mode: Master
355
Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Operational Mode Commands for System Setup
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
