fpc
Syntax
fpc slot {
pic
pic-number {
sfpplus
{
pic-mode
mode;
}
}
power-budget-priority
priority;
Hierarchy Level
[edit
chassis
]
Release Information
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Description
On an EX3200 or an EX4200 switch, specify the port of the SFP+ uplink module for which
you want to configure the operating mode.
On an EX8200 switch, specify the line card slot for which you want to assign a power
priority.
Options
slot
—Number of the slot:
•
0—EX3200 and standalone EX4200 switches. The FPC refers to the switch itself.
•
0–9—EX4200 switch in a Virtual Chassis configuration. The value corresponds to the
switch’s member ID.
•
0–7—EX8200 switch. The slot is a line card slot.
•
0–15—EX8216 switch. The slot is a line card slot.
The remaining statements are explained separately.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
•
Setting the Mode on an SFP+ Uplink Module (CLI Procedure) on page 1156
•
Configuring the Power Priority of Line Cards (CLI Procedure) on page 384
Copyright © 2010, Juniper Networks, Inc.
388
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
