5.
Log in to the switch using your username and password.
6.
To enter configuration mode:
user@switch> configure
You will see this output, with the hash or pound mark indicating configuration mode.
Entering configuration mode
[edit]
user@switch#
7.
Load the configuration file:
[edit]
user@switch# load merge terminal
8.
At the cursor, paste the contents of the Clipboard using the mouse and the Paste icon:
[edit]
user@switch# load merge terminal
[Type ^D at a new line to end input]
>Cursor is here. Paste the contents of the clipboard here<
9.
Press Enter.
10.
Press Ctrl+D to set the end-of-file marker.
To view results of the configuration steps before committing the configuration, type the
show
command at the user prompt.
To commit these changes to the active configuration, type the
commit
command at the
user prompt.You can also edit the configuration interactively using the CLI and commit
it at a later time.
Related
Documentation
Uploading a Configuration File (J-Web Procedure) on page 423
•
•
Understanding Configuration Files for EX Series Switches on page 397
Uploading a Configuration File (J-Web Procedure)
You can create a configuration file on your local system, copy the file to the EX Series
switch and then load the file into the CLI. After you have loaded the configuration file,
you can commit it to activate the configuration on the switch. You can also edit the
configuration interactively using the CLI and commit it at a later time.
To upload a configuration file from your local system:
1.
Select
Maintain > Config Management > Upload
.
The main pane displays the File to Upload box.
2.
Specify the name of the file to upload using one of the following methods:
•
Type the absolute path and filename in the File to Upload box.
•
Click
Browse
to navigate to the file.
3.
Click
Upload and Commit
to upload and commit the configuration.
423
Copyright © 2010, Juniper Networks, Inc.
Chapter 24: Managing Junos OS Configuration
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
