Juniper JUNOS OS 10.3 - SOFTWARE Manual Download

Page: 695 / 3946

sip-server

Syntax

sip-server [address | name];

Hierarchy Level

[edit system

services dhcp

[edit system

services dhcp pool

[edit system

services dhcp static-binding

]

Release Information

Statement introduced in Junos OS Release 10.1 for EX Series switches.

Description

Configure Session Initiation Protocol (SIP) server addresses or names for DHCP servers.

Options

address

—IPv4 address of the SIP server. To configure multiple SIP servers, include multiple

address

options. This address must be accessible by all clients served within a

specified range of addresses (based on an address pool or static binding).

name

—Fully qualified domain name of the SIP server. To configure multiple SIP servers,

include multiple

name

options. This domain name must be accessible by all clients

served within a specified range of addresses (based on an address pool or static
binding).

Required Privilege

Level

system—To view this statement in the configuration.
system-control—To add this statement to the configuration.

Documentation

•

Configuring a DHCP SIP Server (CLI Procedure) on page 552

source-address (SRC Software)

Syntax

source-address source-address;

Hierarchy Level

[edit system services service-deployment]

Release Information

Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.

Description

Enable Junos OS to work with the Session and Resource Control (SRC) software.

Options

source-address

— Local IPv4 address to be used as source address for traffic to the SRC

server. The source address restricts traffic within the out-of-band network.

Required Privilege

Level

system—To view this statement in the configuration.
system-control—To add this statement to the configuration.

Documentation

•

Configuring the JUNOS Software to Work with SRC Software

599

Chapter 37: Configuration Statements for System Services

Summary of Contents for JUNOS OS 10.3 - SOFTWARE


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOS OS 10.3 - SOFTWARE

Reviews:

Related manuals for JUNOS OS 10.3 - SOFTWARE

Brands by name

Popular brands

Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Search results

Summary of Contents for JUNOS OS 10.3 - SOFTWARE

Reviews:

Related manuals for JUNOS OS 10.3 - SOFTWARE

Brands by name

Popular brands