show system services dhcp pool
Syntax
show system services dhcp pool
<detail>
<subnet-address>
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
(J Series routers and EX Series switches only) Display Dynamic Host Configuration
Protocol (DHCP) server IP address pools.
Options
none
—Display brief information about all IP address pools.
detail
—(Optional) Display detailed information.
subnet-address
—(Optional) Display information for the specified subnet address.
Required Privilege
Level
view and system
List of Sample Output
show system services dhcp pool on page 627
show system services dhcp pool subnet-address on page 627
show system services dhcp pool subnet-address detail on page 627
Output Fields
Table 108 on page 626 describes the output fields for the
show system services dhcp pool
command. Output fields are listed in the approximate order in which they appear.
Table 108: show system services dhcp pool Output Fields
Level of Output
Field Description
Field Name
None specified
Subnet on which the IP address pool is defined.
Pool name
None specified
Lowest address in the IP address pool.
Low address
None specified
Highest address in the IP address pool.
High address
None specified
Addresses excluded from the address pool.
Excluded
addresses
None specified
(
subnet-address
option only) Subnet to which the specified address pool
belongs.
Subnet
None specified
(
subnet-address
option only) Range of IP addresses in the address pool.
Address range
detail
Number of IP addresses in the pool that are assigned to DHCP clients and the
total number of IP addresses in the pool.
Addresses
assigned
detail
Number of assigned IP addresses in the pool that are active.
Active
detail
Number of assigned IP addresses in the pool that are excluded.
Excluded
Copyright © 2010, Juniper Networks, Inc.
626
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
