show chassis environment fpc
Syntax
show chassis environment fpc
<slot>
Syntax (TX Matrix and
TX Matrix Plus Router)
show chassis environment fpc
<lcc number>
<slot>
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
(M40e, M120, M160, M320, MX Series, and T Series routers and EX Series switches only)
Display environmental information about Flexible PIC Concentrators (FPCs).
Options
none
—Display environmental information about all FPCs. On a TX Matrix router, display
environmental information about all FPCs on the TX Matrix router and its attached
T640 routers. On a TX Matrix Plus router,display environmental information about
all FPCs on the TX Matrix Plus router and its attached T1600 routers.
lcc
number
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display environmental information about the FPC in a T640 router (or line-card
chassis) that is connected to the TX Matrix router. On a TX Matrix Plus router, display
environmental information about the FPC in a T1600 router (or line-card chassis)
that is connected to the TX Matrix Plus router. Replace
number
with a value from
0
through
3
.
slot
—(Optional) Display environmental information about an individual FPC:
•
(TX Matrix and TX Matrix Plus routers only) On a TX Matrix router, if you specify
the number of the T640 router by using only the
lcc number
option (the
recommended method), replace
slot
with a value from
0
through
7
. Similarly, on
a TX Matrix Plus router, if you specify the number of the T1600 router by using only
the
lcc number
option (the recommended method), replace
slot
with a value from
0
through
7
. Otherwise, replace
slot
with a value from
0
through
31
. For example,
the following commands have the same result:
user@host> show chassis environment fpc 1 lcc 1
user@host> show chassis environment fpc 9
•
M120 router—Replace
slot
with a value from
0
through
5.
•
MX240 router—Replace
slot
with a value from
0
through
2
.
•
MX480 router—Replace
slot
with a value from
0
through
5
.
•
MX960 router—Replace
slot
with a value from
0
through
11
.
•
Other routers—Replace
slot
with a value from
0
through
7
.
•
EX Series switches:
Copyright © 2010, Juniper Networks, Inc.
766
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
