show chassis pic
Syntax
show chassis pic fpc-slot slot-number pic-slot slot-number
Syntax (TX Matrix and
TX Matrix Plus
Routers)
show chassis pic fpc-slot slot-number pic-slot slot-number
<lcc number>
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Display status information about the PIC installed in the specified Flexible PIC
Concentrator (FPC) and PIC slot.
Options
fpc-slot
slot-number
—Display information about the PIC in this particular FPC slot:
•
TX Matrix and TX Matrix Plus routers only—On a TX Matrix router, if you specify
the number of the T640 router by using the
lcc number
option (the recommended
method), replace
slot-number
with a value from
0
through
7
. Otherwise, replace
slot-number
with a value from
0
through
31
. For example, the following commands
have the same result:
Likewise, on a TX Matrix Plus router, if you specify the number of the T1600 router
by using the
lcc number
option (the recommended method), replace
slot-number
with a value from
0
through
7
. Otherwise, replace
slot-number
with a value from
0
through
31
. For example, the following commands have the same result:
user@host> show chassis pic fpc-slot 1 lcc 1 pic-slot 1
user@host> show chassis pic fpc-slot 9 pic-slot 1
•
M120 routers only—Replace
slot-number
with a value from
0
through
5
.
•
MX80 routers only—Replace
slot-number
with a value from
0
through
1
.
•
MX240 routers only—Replace
slot-number
with a value from
0
through
2
.
•
MX480 routers only—Replace
slot-number
with a value from
0
through
5
.
•
MX960 routers only—Replace
slot-number
with a value from
0
through
11
.
•
Other routers—Replace
slot-number
with a value from
0
through
7
.
•
EX Series switches:
•
EX3200 switches and EX4200 standalone switches—Replace
slot-number
with
0.
•
EX4200 switches in a Virtual Chassis configuration—Replace
slot-number
with
a value from 0 through 9 (switch’s member ID).
•
EX8208 switches—Replace
slot-number
with a value from 0 through 7 (line
card).
•
EX8216 switches—Replace
slot-number
with a value from 0 through 15 (line
card).
Copyright © 2010, Juniper Networks, Inc.
830
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
