show pfe terse
Syntax
show pfe terse
Syntax (TX Matrix and
TX Matrix Plus Router)
show pfe terse
<lcc number | scc>
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Display Packet Forwarding Engine status information.
Options
none
—Display brief information about the Packet Forwarding Engine.
lcc
number
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix, display
Packet Forwarding Engine information for a specific T640 router (or line-card chassis)
that is connected to a TX Matrix router. On a TX Matrix Plus router, display Packet
Forwarding Engine information for a specific T1600 router (or line-card chassis) that
is connected to a TX Matrix Plus router. Replace
number
with a value from
0
through
3
.
scc
—(TX Matrix routers only) (Optional) Display Packet Forwarding Engine information
for the TX Matrix router (or switch-card chassis).
sfc
—(TX Matrix Plus routers only) (Optional) Display Packet Forwarding Engine
information for the TX Matrix Plus router (or switch-fabric chassis).
Required Privilege
Level
admin
List of Sample Output
show pfe terse (TX Matrix Router) on page 863
show pfe terse (TX Matrix Plus Router) on page 863
show pfe terse sfc (TX Matrix Plus Router) on page 864
show pfe terse (TX
Matrix Router)
user@host>
show pfe terse
Slot Type Slot State Flags Uptime
0 SFM Present Online 0x0bf 01:25:42
show pfe terse (TX
Matrix Router)
2 SFM Present Online 0x0bf 01:25:40
0 FPC Present Online 0x102 01:25:57
1 FPC Present Online 0x102 01:25:55
2 FPC Present Online 0x102 01:25:53
show pfe terse (TX
Matrix Plus Router)
user@host>
show pfe terse
sfc0-re0:
--------------------------------------------------------------------------
Slot Type Slot State Uptime
0 LCC Present Online 2d 05:26
lcc0-re0:
--------------------------------------------------------------------------
Slot Type Slot State Uptime
0 GFPC Present Online 2d 05:25
1 GFPC Present Online 2d 05:25
863
Copyright © 2010, Juniper Networks, Inc.
Chapter 42: Operational Mode Commands for System Monitoring
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
