manualshive.com logo in svg

Juniper JUNOSE 11.3, Configuration Manual

Get started with Juniper JUNOSE 11.3 with our free Configuration Manual. Download the comprehensive manual from 88.208.23.73:8080 to learn how to configure and optimize the features of this powerful networking product. Perfect for beginners and experts alike, the manual ensures you get the most out of your device.

Share
Download
background image

Configuring IP/Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Configuring IP Tunnels, Shared IP Interfaces, and Subscriber Interfaces . . . . . . . . 22

Configuring IP Tunnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Configuring Shared Interfaces and Subscriber Interfaces . . . . . . . . . . . . . . . . 22

Configuring Routing Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Configuring VRRP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Configuring Routing Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Configuring QoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Configuring Policy Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Configuring Remote Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Chapter 2

Command-Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Command Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Command-Line Prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Keywords and Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Keywords and Parameters Together . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Using CLI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Abbreviated Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
The ? Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Backspace or Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Enter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Arrow Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
The no Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
run and do Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
show Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Redirection of show Command Output . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Regular Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
The - -More- - Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Responding to Prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

CLI Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Levels of Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

User Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Privileged Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Initialization Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Accessing the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Logging In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Privileged-Level Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Defining CLI Levels of Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Accessing the Privileged Exec Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Moving from Privileged Exec to User Exec Mode . . . . . . . . . . . . . . . . . . . . . . . 48
Logging Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

CLI Command Privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

CLI Privilege Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Examples Using Privilege Group Membership . . . . . . . . . . . . . . . . . . . . . . . . . 50

Copyright © 2010, Juniper Networks, Inc.

x

JunosE 11.3.x System Basics Configuration Guide

Summary of Contents for JUNOSE 11.3

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.3

FARONICS POWER SAVE MAC Getting Started Manual preview
POWER SAVE MAC
Brand: FARONICS Pages: 5
FARONICS POWER SAVE Product Data Sheet preview
POWER SAVE
Brand: FARONICS Pages: 2
FARONICS DEEP FREEZE ENTERPRISE Getting Started Manual preview
DEEP FREEZE ENTERPRISE
Brand: FARONICS Pages: 3
FARONICS ANTI-EXECUTABLE ENTERPRISE Getting Started Manual preview
ANTI-EXECUTABLE ENTERPRISE
Brand: FARONICS Pages: 2
Drobo How-To Manual preview
How-To
Brand: Drobo Pages: 6
Tascam HS-P82 Release Note preview
HS-P82
Brand: Tascam Pages: 6
RSA Security RSA RADIUS Server 6.1 Administrator'S Manual preview
RSA RADIUS Server 6.1
Brand: RSA Security Pages: 118
Elecard Converter Studio User Manual preview
Converter Studio
Brand: Elecard Pages: 76
Eagle 6 Installation And Operation Instructions Manual preview
6
Brand: Eagle Pages: 80
GRASS VALLEY KAYAK HD Installation And Service Manual preview
KAYAK HD
Brand: GRASS VALLEY Pages: 216
FieldServer FS-8700-16 Driver Manual preview
FS-8700-16
Brand: FieldServer Pages: 32
FieldServer FS-8700-54 Driver Manual preview
FS-8700-54
Brand: FieldServer Pages: 8
FieldServer FS-8700-66 Manual preview
FS-8700-66
Brand: FieldServer Pages: 29
MACROMEDIA CONTRIBUTE 3-DEPLOYING CONTRIBUTE Manual preview
CONTRIBUTE 3-DEPLOYING CONTRIBUTE
Brand: MACROMEDIA Pages: 38
ICP Interactive UNIX Using Manual preview
Interactive UNIX
Brand: ICP Pages: 6
Quantum GoVault 40GB Quick Start Manual preview
GoVault 40GB
Brand: Quantum Pages: 16
Datamax 123 Print v1.1 User Manual preview
123 Print v1.1
Brand: Datamax Pages: 226
LapLink Gold Corporate 5 User Manual preview
Gold Corporate 5
Brand: LapLink Pages: 166

Brands by name

Popular brands

Load more brands