Table 10: Command Mode Overview
(continued)
Exit from Mode
Access to Mode
Use of Mode
Mode Name
•
Use the
exit
command twice to
return to Global Configuration
mode.
•
Press Ctrl+z to return to Exec
mode.
•
From Layer 2
Configuration mode, use
the
neighbor
command.
•
Prompt:
host1(config-l2c-
neighbor)#
•
Configure ANCP (L2C)
neighbor parameters.
Layer 2 Control Neighbor
Configuration
•
Use the
exit
command once to
return to Global Configuration
mode.
•
Press Ctrl+z to return to Exec
mode.
•
From Global Configuration
mode, specify the
mpls
ldp profile
command.
•
Prompt:
host1(config-ldp)#
•
Configure MPLS LDP
profile parameters.
LDP Configuration
•
Use the
exit
command once to
return to Global Configuration
mode.
•
Press Ctrl+z to return to Exec
mode.
•
From Global Configuration
mode, use the
line
command.
•
Prompt:
host1(config-line)#
•
Modify a virtual terminal
line.
Line Configuration
•
Use the
exit
command twice to
return to Global Configuration
mode.
•
Press Ctrl+z to return to Exec
mode.
•
From the IPSec Transport
Profile Configuration
mode, use the
local ip
address
command.
•
Prompt:
host1(config-ipsec-transport-
profile-local)#
•
Configure preshared IKE
keys for L2TP over IPSec
profiles.
Local IPSec Transport
Profile Configuration
•
Use the
exit
command to return
to Global Configuration mode.
•
Press Ctrl+z to return to Exec
mode.
•
From Global Configuration
mode, specify the aaa
local username or the
aaa
local database
command.
•
Prompt:
host1(config-local-user)#
•
Configure user
parameters in local user
databases.
Local User Configuration
•
Use the
exit
command once to
return to Global Configuration
mode.
•
Press Ctrl+z to return to Exec
mode.
•
From Global Configuration
mode, specify the
map-class frame-relay
command.
•
Prompt:
host1(config-map-class)#
•
Specify fragmentation for
a map class.
Map Class Configuration
•
Use the
exit
command once to
return to Global Configuration
mode.
•
Press Ctrl+z to return to Exec
mode.
•
From Global Configuration
mode, use the
map-list
command.
•
Prompt:
host1(config-map-list)#
•
Configure map list
parameters.
Map List Configuration
Copyright © 2010, Juniper Networks, Inc.
72
JunosE 11.3.x System Basics Configuration Guide
Summary of Contents for JUNOSE 11.3
