manualshive.com logo in svg

Juniper JUNOSE 11.3, Configuration Manual

Get started with Juniper JUNOSE 11.3 with our free Configuration Manual. Download the comprehensive manual from 88.208.23.73:8080 to learn how to configure and optimize the features of this powerful networking product. Perfect for beginners and experts alike, the manual ensures you get the most out of your device.

Share
Download
background image

Copying Partial Releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300

Configuring the NFS Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
Configuration Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
Monitoring the NFS Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303

Using a Loopback Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Using the Telnet Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
Configuring DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
Assigning Name Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
Using One Name Resolver for Multiple Virtual Routers . . . . . . . . . . . . . . . . 308
Monitoring DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308

Troubleshooting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309

Creating Core Dump Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309

Boot Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Global Configuration Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310

Managing Core Dump Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312

Enabling and Disabling the Core Dump Monitor . . . . . . . . . . . . . . . . . . . 313
Specifying the Core Dump Monitor Interval . . . . . . . . . . . . . . . . . . . . . . 314
Viewing Core Dump Monitor Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314

Accessing the Core Dump File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
Capturing and Writing Core Dumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
Understanding the Core Dump File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
Tracking IP Prefix Reachability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
Gathering Information for Customer Support . . . . . . . . . . . . . . . . . . . . . . . . 319

Managing and Monitoring Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320

Enabling and Disabling the Resource Threshold Monitor . . . . . . . . . . . . . . . 320
Viewing Resource Threshold Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321

Monitoring the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322

Chapter 6

Managing Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342

ERX7xx Models, ERX14xx Models, and the ERX310 Broadband Services

Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
Line Modules and I/O Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
SRP Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342

E120 and E320 Broadband Services Routers . . . . . . . . . . . . . . . . . . . . . . . . . 343

Line Modules and IOAs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
SRP Modules and SFMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345

Disabling and Reenabling Line Modules, SRP Modules, and SFMs . . . . . . . . . . . 346
Disabling and Reenabling IOAs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348
Removing an SRP Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
Replacing Line Modules on ERX Routers, the E120 Router, and the E320

Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Replacing a Line Module by Erasing the Slot Configuration . . . . . . . . . . . . . . 351
Replacing a Line Module Without Erasing the Slot Configuration . . . . . . . . 352

xvii

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for JUNOSE 11.3

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.3

FARONICS DEVICE FILTER MAC Getting Started Manual preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 4
MACROMEDIA FLASH 8-FLASH Tutorials Manual preview
FLASH 8-FLASH
Brand: MACROMEDIA Pages: 292
MACROMEDIA BREEZE 5 Manual preview
BREEZE 5
Brand: MACROMEDIA Pages: 26
MACROMEDIA BREEZE Installation Manual preview
BREEZE
Brand: MACROMEDIA Pages: 32
Arturia Analog Factory S.E. User Manual preview
Analog Factory S.E.
Brand: Arturia Pages: 31
Sony Ericsson Controller Mode Application Note preview
Controller Mode
Brand: Sony Ericsson Pages: 10
Campbell BMP5 Direct SDK Instruction Manual preview
BMP5 Direct SDK
Brand: Campbell Pages: 32
RTS RTS ISDN 2002 Operator'S Manual preview
RTS ISDN 2002
Brand: RTS Pages: 51
ShoreTel ShoreWare User Manual preview
ShoreWare
Brand: ShoreTel Pages: 25
Promise Technology dc5750 - Microtower PC User Manual preview
dc5750 - Microtower PC
Brand: Promise Technology Pages: 114
Red Hat Cluster Suite Manual preview
Cluster Suite
Brand: Red Hat Pages: 188
Benefon TWIG CONFIGURATOR User Manual preview
TWIG CONFIGURATOR
Brand: Benefon Pages: 28
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Release Note preview
STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008
Brand: Juniper Pages: 14
EverFocus PowerVideo Plus User Manual preview
PowerVideo Plus
Brand: EverFocus Pages: 80
da Vinci Technologies EE Pro User Manual preview
EE Pro
Brand: da Vinci Technologies Pages: 249
IBM IS-PHONE 6.X Quick Installation Manual preview
IS-PHONE 6.X
Brand: IBM Pages: 15
YOKOGAWA vigilantplant EJXMVTool FSA120 User Manual preview
vigilantplant EJXMVTool FSA120
Brand: YOKOGAWA Pages: 98
Xerox DocuPrint 100MX User Manual preview
DocuPrint 100MX
Brand: Xerox Pages: 74

Brands by name

Popular brands

Load more brands