Juniper JUNOSE 11.3 Configuration Manual Download

Page: 220 / 632

•

Use the

version to set the size of the bulk statistics file to the default, 5767168 bytes.

•

See bulkstats collector.

bulkstats collector primary-receiver

•

Use to assign the primary receiver to which the system transfers data.

•

The index for the receiver must match the index that you specified with the

bulkstats

receiver remote-name

command.

•

Example

host1(config)#

bulkstats collector 2 primary-receiver 7

•

Use the

version to clear the primary receiver and disable the collector.

•

See bulkstats collector.

bulkstats collector secondary-receiver

•

Use to assign the secondary (that is, the backup) receiver to which the system transfers
data.

•

The index for the receiver must match the index you specified with the

bulkstats

receiver remote-name

command.

•

Example

host1(config)#

bulkstats collector 2 secondary-receiver 5

•

Use the

version to clear the secondary receiver.

•

See bulkstats collector.

bulkstats collector single-interval

•

Use to set the system to retrieve bulk statistics once only, rather than periodically.

•

Example

host1(config)#

bulkstats collector 2 single-interval

•

Use the

version to set the system to retrieve bulk statistics periodically, the default

situation.

•

See bulkstats collector.

bulkstats interfaces description-format common

•

Use to set the encoding scheme of the ifDescr object that the bulk statistics application
reports to the conventional industry method.

•

This command provides compatibility with software that uses the industry encoding
scheme.

•

For more information, see “Configuring Encoding Method” on page 152.

•

Example

host1(config)#

bulkstats interfaces description-format common

190

JunosE 11.3.x System Basics Configuration Guide

Summary of Contents for JUNOSE 11.3








































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands

Juniper JUNOSE 11.3, Configuration Manual

Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands