Juniper JUNOSE 11.3 Configuration Manual Download

Page: 272 / 632

•

Use to disable the auto-upgrade feature of the system’s timing selector.

•

The system starts out by setting the operational timing selector to the administratively
configured selector. See the

timing select

command.

•

Example

host1(config)#

timing disable-auto-upgrade

•

Use the

version to restore the factory default, which is auto-upgrade enabled.

•

See timing disable-auto-upgrade.

timing select

•

Use to specify which of the configured timing sources is used by default.

•

Primary timing source is preferred over secondary, and secondary is preferred over
tertiary. See the

timing source

command.

•

If you enable the auto-upgrade feature, the system does not try to upgrade beyond
the administratively configured selector.

•

Example

host1(config)#

timing select secondary

•

There is no

version.

•

See timing select.

timing source

•

Use to specify how the SRP module exchanges timing signals with an interface.

•

You can specify primary, secondary, and tertiary timing sources.

•

You can specify one external source received on an I/O module or IOA other than the
SRP I/O module or SRP IOA.

•

You can specify two or more internal sources or external sources received through the
SRP I/O module or SRP IOA external timing ports.

•

On the E120 and E320 routers, you can specify sonet for only two of the available three
timing sources (primary, secondary, or tertiary).

•

The available sources to choose are:

•

ds1—DS1 interface

•

ds3—DS3 interface

•

e1—E1 interface

•

e3—E3 interface

•

sonet—SONET interface

•

internal—Internal system controller (SC) oscillator

•

line—External timing input on SRP module

242

JunosE 11.3.x System Basics Configuration Guide

Summary of Contents for JUNOSE 11.3








































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands

Juniper JUNOSE 11.3, Configuration Manual

Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands