Juniper JUNOSE 11.3 Configuration Manual Download

Page: 304 / 632

•

Use to display an exec banner on a particular line after user authentication (if any) and
before the first prompt of a CLI session.

•

Banners on the lines are enabled by default; the

version does not reenable banners

on the lines.

•

See “banner” on page 273 command description for more information about configuring
an exec banner.

•

Example

host1(config-line)#

exec-banner

•

Use the

default

version to restore the default setting, in which the banner is displayed

on all lines.

•

Use the

version to disable the exec banner on the line. If both the exec and MOTD

banners are enabled on a line, issuing the

no exec-banner

command disables both

the exec banner and the MOTD banner. The

no motd-banner

command behaves

differently from the

no exec-banner

command.

•

See exec-banner.

motd-banner

•

Use to display an MOTD banner on a particular line when a connection is initiated.

•

Banners on the lines are enabled by default; the

version does not reenable banners

on the lines.

•

See “banner” on page 273 command description for more information about configuring
an MOTD banner.

•

Example

host1(config-line)#

motd-banner

•

Use the

default

version to restore the default setting, in which the banner is displayed

on all lines.

•

Use the

version to disable the MOTD banner on the line. If both MOTD and exec

banners are enabled on a line, issuing the

no motd-banner

command disables the

MOTD banner and leaves the exec banner enabled. The

no motd-banner

command

behaves differently from the

no exec-banner

command.

•

See motd-banner.

Monitoring the Console Settings

You can use the following commands to monitor console settings.

show line console 0

Use to view the parameters configured for all future console sessions and the current
console session.

•

Example

274

JunosE 11.3.x System Basics Configuration Guide

Summary of Contents for JUNOSE 11.3








































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands

Juniper JUNOSE 11.3, Configuration Manual

Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands