manualshive.com logo in svg

Juniper JUNOSE 11.3, Configuration Manual

Get started with Juniper JUNOSE 11.3 with our free Configuration Manual. Download the comprehensive manual from 88.208.23.73:8080 to learn how to configure and optimize the features of this powerful networking product. Perfect for beginners and experts alike, the manual ensures you get the most out of your device.

Share
Download
background image

In this documentation, the flash card on the primary SRP module is referred to as the
primary flash card; the flash card on the redundant SRP module is referred to as the
redundant flash card.

If you have two SRP modules installed in a router, you can use flash cards of different
capacities on the SRP modules. The effective capacity of the higher-capacity flash card
equals that of the lower-capacity flash card.

Flash Features

The software contains a number of features that optimize the way the router restores
its configuration if it is shut down improperly:

•

The router tracks improper shutdowns.

•

After an improper shutdown, the router runs an investigation of the file allocation table
(FAT) the next time it reboots.

•

The router creates backups of critical files.

•

When you install a new flash card or restart the router after shutting it down incorrectly,
a utility scans the flash card to detect corrupt sectors. If the utility finds files or
directories that contain corrupt sectors, it removes the files and directories, because
they can no longer be used. The utility also fixes problems with unused sectors. If the
utility cannot correct a corrupt sector, it marks the sectors so that they cannot be
reused. Errors in the boot block, FAT, or root directory are fatal and cannot be corrected
by the scan utility.

•

In a router that contains two SRP modules, if the scanning utility detects corrupt sectors
in flash on the primary SRP module during rebooting, the primary SRP module reboots
again. Both SRP modules now have standby status and reboot. The first SRP module
to complete rebooting becomes the primary. Because the former redundant module
started to reboot first, it likely becomes the primary. When the former primary module
has rebooted and the scan utility has fixed corrupt sectors in its flash card, the SRP
modules will synchronize. Any files or directories removed by the scan utility are restored
during the synchronization.

•

If you reboot the router before it has completely written configuration updates to the
flash card, the router starts with the last saved configuration. If you reboot the router
after it has written the configuration updates to the flash card, but before it has applied
those updates to actual configuration data, the configuration update process resumes
immediately following the reboot and is completed before any application accesses
its configuration data.

Flash Features on the E120 Router and the E320 Router

The E120 and E320 routers can have a second flash card installed with its SRP modules.
Device names are reserved for the E120 and E320 routers flash card slots: disk0, disk1,
standby-disk0, and standby-disk1. For backward compatibility, you can use the name
standby, which is equivalent to standby-disk0. You can use the second card (disk1 or
standby-disk1) only for storage of core dump (.dmp) files. When the a card is installed
and mounted as disk1 or standby-disk1, all .dmp files are automatically stored on this
card. You must use the card mounted as disk0 or standby-disk0 for all other file types.

365

Copyright © 2010, Juniper Networks, Inc.

Chapter 6: Managing Modules

Summary of Contents for JUNOSE 11.3

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.3

Canon imagePROGRAF W6400 Manual preview
imagePROGRAF W6400
Brand: Canon Pages: 84
FARONICS DEVICE FILTER MAC Getting Started Manual preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 4
Xerox 701P40211 System Manual preview
701P40211
Brand: Xerox Pages: 110
GE Secure Perfect 6.1.1 User Manual preview
Secure Perfect 6.1.1
Brand: GE Pages: 269
FARONICS ANTI-VIRUS Manual preview
ANTI-VIRUS
Brand: FARONICS Pages: 4
FARONICS WINSELECT STANDARD Manual preview
WINSELECT STANDARD
Brand: FARONICS Pages: 36
Primera SureThing User Manual preview
SureThing
Brand: Primera Pages: 48
Intrinsyc Telephony Modem Simulator Brochure preview
Telephony Modem Simulator
Brand: Intrinsyc Pages: 2
Avocent DSR Series DSR1021 Quick Installation Manual preview
DSR Series DSR1021
Brand: Avocent Pages: 2
Polycom CMA V4.0 User Manual preview
CMA V4.0
Brand: Polycom Pages: 23
Promise Technology FastTrak SX Series Version 4.4 User Manual preview
FastTrak SX Series Version 4.4
Brand: Promise Technology Pages: 102
EverFocus Flex1.0 User Manual preview
Flex1.0
Brand: EverFocus Pages: 123
Cyber Sciences CyTime EM-100 Quick Start Manual preview
CyTime EM-100
Brand: Cyber Sciences Pages: 2
GRASS VALLEY K2 SUMMIT Datasheet preview
K2 SUMMIT
Brand: GRASS VALLEY Pages: 4
FieldServer FS-8700-52 Driver Manual preview
FS-8700-52
Brand: FieldServer Pages: 17
Vaisala Veriteq viewLinc 3.6 Administrator'S Manual preview
Veriteq viewLinc 3.6
Brand: Vaisala Pages: 122
MACROMEDIA DREAMWEAVER MX 2004-DREAMWEAVER API Reference preview
DREAMWEAVER MX 2004-DREAMWEAVER API
Brand: MACROMEDIA Pages: 486
KAPERSKY ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER... Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER...
Brand: KAPERSKY Pages: 143

Brands by name

Popular brands

Load more brands