Juniper JUNOSE 11.3 Configuration Manual Download

Page: 437 / 632

•

This command does not apply to passwords set with

enable secret

enable password

password

(Line Configuration mode).

•

This command does apply to authentication key passwords and BGP neighbor
passwords.

•

Example

host1(config)#

service password-encryption

•

Use the

version to remove the encryption assignment.

•

See service password-encryption.

Setting and Erasing Passwords

You can set the following passwords:

•

Enable passwords that control access to different groups of commands.

•

A console password that controls access to the console.

•

Passwords for individual vty lines or groups of vty lines.

Privilege Levels

Different groups of commands are associated with privilege levels (Table 45 on page 407)

You can set enable passwords to allow users to access commands at different privilege
levels.

Table 45: Commands Available at Different Privilege Levels

Commands Available

Privilege
Level

help

exit

enable

, and

disable

commands

User Exec commands plus commands at level 0

Privileged Exec

show

commands plus commands at levels 0 and 1

All commands except support commands

Support commands that Juniper Networks Technical Support may provide and
all other commands

To maximize security and usability, set different passwords for levels 1, 5, 10, and 15. By
default, no

enable

passwords exist.

Accessing Privilege Levels

If users have access to the console, they automatically have access to privilege level 0.
To access higher levels of privilege, they must enter the

enable

privilege-level

command.

When users specify a privilege level, the system determines whether there is a password

407

Chapter 7: Passwords and Security

Summary of Contents for JUNOSE 11.3








































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands

Juniper JUNOSE 11.3, Configuration Manual

Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands