Juniper JUNOSE 11.3 Configuration Manual Download

Page: 78 / 632

•

Example 1 (accessing Privileged Exec mode at the default level [10])

host1>

enable

password:*******
host1#

•

Example 2 (accessing Privileged Exec mode at the highest level [15]; a password is
not set for this example)

host1>

enable 15

host1#

•

There is no

version.

•

See enable.

Moving from Privileged Exec to User Exec Mode

To move from the Privileged Exec mode to the User Exec mode, enter the

disable

command. For example:

host1#

disable

host1>

NOTE:

Using the

exit

command from either the Privileged Exec or User Exec

mode logs out of the CLI.

To move to a lower Privileged Exec mode, follow the

disable

command with an access

level value. For example:

host1#

show privilege

Privilege level is 10

host1#

disable 5

host1#

show privilege

Privilege level is 5

disable

Use to exit Privileged Exec mode and return to User Exec mode.

•

Use to shift to a lower Privilege Exec mode level without returning to User Exec mode.
Specifying a privilege level after the

disable

command changes the Privileged Exec

mode to the lower level that you specify; you do not return to User Exec mode.

•

Example 1

host1#

disable

host1>

•

Example 2

host1#

show privilege

Privilege level is 10
host1#

disable 5

host1#

show privilege

JunosE 11.3.x System Basics Configuration Guide

Summary of Contents for JUNOSE 11.3








































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands

Juniper JUNOSE 11.3, Configuration Manual

Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands