Juniper JUNOSE 11.3 Configuration Manual Download

Page: 89 / 632

•

Use the

default

version to restore the default privilege level for the command.

NOTE:

You must access the CLI at privilege level 15 to view or use this

command.

•

See privilege level.

Viewing CLI Privilege Information

You can view CLI privilege information for yourself (the current user), all connected users
on the router, or for any modified CLI commands.

Viewing the Current User Privilege Level

Use the

show privilege

command to view your current privilege level.

show privilege

•

Use to view your current privilege level.

•

Example

host1#

show privilege

Privilege level is 10

•

There is no

version.

•

See show privilege.

Viewing Privilege Levels for All Connected Users

Use the

show users detail

command to view the privilege levels for all users currently

connected to the router. See “Monitoring the FTP Server” on page 298 for information
about the

show users detail

command.

Viewing Privilege Levels for Changed CLI Commands

Use the

show configuration

command to view the changed privilege levels for any

modified CLI commands. See “Saving the Current Configuration” on page 264 for
information about the

show configuration

command.

NOTE:

The

show configuration

command output displays output specific

to the session access level. For example, if the session is enabled at level 5,
issuing the

show configuration

command displays only output for commands

at level 5 and below.

show privilege group

•

Use to view the privilege groups.

•

Example

Chapter 2: Command-Line Interface

Summary of Contents for JUNOSE 11.3








































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands

Juniper JUNOSE 11.3, Configuration Manual

Search results

Summary of Contents for JUNOSE 11.3

Reviews:

Related manuals for JUNOSE 11.3

Brands by name

Popular brands