2
AP12 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved
I/O ports
Reset
Reset to the factory default settings
Eth0+PoE
10/100/1000BASE-T RJ45 interface that supports 802.3at
PoE PD
Pass Thru
Passive RJ45 Pass Thru (rear to bottom)
Eth1+PSE
10/100/1000BASE-T RJ45 interface with Class 2 PSE out
(enabled if you have 802.3at PoE input on Eth0)
Eth2-Eth3
10/100/1000BASE-T RJ45 interfaces