manualshive.com logo in svg

Juniper MX10004, Hardware Manual

The Juniper MX10004 is a high-performance networking device designed for seamless connectivity and advanced network services. Ensure the optimal functioning of this innovative hardware with our comprehensive Hardware Manual. Download it for free from our website to maximize the potential of your Juniper MX10004.

Share
Download
background image

CAUTION: If you are mounting more than one router, mount the first one at the
bottom of the rack. Do not attempt to mount a router manually in an upper
position in a rack.

NOTE: The chassis has two handles that are designed for subtle positioning of the
chassis. Do not lift the chassis by the handles.

b. With one person on each side and one person in the rear, hold the bottom of the chassis and

carefully lift it onto the mounting tray (see 

Figure 41 on page 125

).

Figure 41: Lift the MX10004 Manually

7.

Carefully slide the chassis onto the mounting tray until the chassis flanges contact the rack rails.
The mounting blades ensure that the holes in the chassis flanges line up with the holes in the rack
rails.

125

Summary of Contents for MX10004



































































































































































































































































































Reviews:

No comments

Related manuals for MX10004

NEC Univerge SV8100 System Configuration Manual preview
Univerge SV8100
Brand: NEC Pages: 44
iDirect Evolution X3 Installation And Safety Manual preview
Evolution X3
Brand: iDirect Pages: 60
Idis DR-6100 Series Operation Manual preview
DR-6100 Series
Brand: Idis Pages: 86
Paradyne Hotwire 6301 Installation Instructions Manual preview
Hotwire 6301
Brand: Paradyne Pages: 20
Paradyne COMSPHERE 3610 Installation Instructions preview
COMSPHERE 3610
Brand: Paradyne Pages: 2
ETAS FETK-S2.1 User Manual preview
FETK-S2.1
Brand: ETAS Pages: 69
Dahua DHI-NVR2104-P-4KS2 Quick Start Manual preview
DHI-NVR2104-P-4KS2
Brand: Dahua Pages: 23
Renesas Compact Emulator M30620T-CPE User Manual preview
Compact Emulator M30620T-CPE
Brand: Renesas Pages: 52
National Instruments Fieldpoint cFP-RTD-124 Operating Instructions Manual preview
Fieldpoint cFP-RTD-124
Brand: National Instruments Pages: 15
Grizzly PSJ-M3 GEN2 User Manual preview
PSJ-M3 GEN2
Brand: Grizzly Pages: 9
Gbord EN-101 User Manual preview
EN-101
Brand: Gbord Pages: 8
Medel RONDO 3 Quick Manual preview
RONDO 3
Brand: Medel Pages: 28
AMX AXB-PSCV Dimensional Drawing preview
AXB-PSCV
Brand: AMX Pages: 1
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
Maipu SM3100-9TC-AC Install Manual preview
SM3100-9TC-AC
Brand: Maipu Pages: 26
Arctic Accelero TWIN TURBO II Installation Manual preview
Accelero TWIN TURBO II
Brand: Arctic Pages: 2
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Brand: ivideon Pages: 11
IBM Power System S914 Installing Instructions preview
Power System S914
Brand: IBM Pages: 48

Brands by name

Popular brands

Load more brands