You can configure the router name at the [edit system] hierarchy level.
[edit]
root@#
set system host-name
host-name
If your MX10004 router has two RCBs, it is recommended you use a configuration group. You can
use group-name as re0 or re1.
[edit]
root@#
set groups
group-name
system host-name
host-name
For Example:
[edit]
root@#
set groups
re0
system host-name
alpha-router0
[edit]
root@#
set groups
re1
system host-name
alpha-router1
8.
Configure the default gateway.
[edit]
root@#
set routing-options static route default next-hop
address
9.
Configure the IP address and prefix length for the router management interface.
[edit]
root@#
set interfaces em0 unit 0 family inet address
address/prefix-length
NOTE: The management port,
em0
(MGMT for RJ-45 connections) is found on the front of
the RCBs of the MX10004 router.
If your MX10004 router has two RCBs, you can configure each RCB with a separate IP address for
the management Ethernet interface.
143
